In episode #65 We talk about all the problems we have been having i the shop and how we respond to them, the recent meetup with Will and James, epoxy choices, Hand cutting finger joints, What james did in the past and the worst joke of the week yet!

In episode #64 We look at upcoming leather working, blacksmithing, and figured wood projects. Also James’ trip to see Will. we answer your questions about a flex shaft and belt sander grinder attachment. As well as give the joke of the week and talk about what we are watching.

In episode #63  we talk about Sharpening methods, water vs window cleaner on diamonds, bending metal back into place, Doing a meet up and more.

In episode #62 we look back at the last year and see what we like and did not like what are our goals for the future. We also look at Will’s Grizzly build Zack’s Sculpture and James’s Side table. Along with Pinewood Derby cars

In episode #61 We have a special guest Shannon Rogers of the HAnd Tool School. We talk about methods of turning, getting a mirror edge on a diamond plate, and different types of strops and stropping compounds.

In episode #58 we talk over how to not get burnt out with making, how to come up with new inspiration and ideas, what materials we would like to work with and have a tone of audio issues.

In episode #58 guest speaker Brett Mcafee, we talk about how we design our work and come up with creative designs, also answer your questions. https://www.youtube.com/channel/UCPqU-cg2Ko_Q1Q0SamoZt4w

In episode #58 Zack bursts a pipe and makes BEGS We talk about how to dry a log and how to carve up an axe handle

In episode #57 We talk about a foot, wind, and water driven shop. How to work with Corian solid surface countertop and the joys of leather working.

In episode #56 We answer your questions about spending time getting clients or making videos, How do you break away from pine and get into hard woods. And the best joke of the week yet!

In episode #55 We talk about the spring pole lathe and a lot of the turning tools for both the powered lathe and the foot-powered lathe. we also answer viewer questions such as, when to use a drum sander.

In episode #53 We talk about the foot powered lathe, the trip to Germany. as what angle should you use a crosscut or a rip cut saw, how much your wife influences your work and other listener questions. 

In episode #53 We meet then new co-host of the podcast and announce the new name. We also answer a question about big auger bits and how we built our brands.

In this episode, Johnny says farewell to the Crafted Podcast! The show will continue on with James and Zack under a different name, so keep listening next week.

In this week's episode, Johnny, James, and Zack talk about how they deal with bug infested wood, reusing old Oak flooring, and how they stay motivated. Enjoy!

In this week's episode, Johnny, James, and Zack discuss whether design, content, or usability come first when planning out a project. They also answer more listener questions! Enjoy.

We apologize for the delay in publishing and the poor audio quality on this episode. Our typical recording system for the show went on the fritz and we were trying to get a response from their support system to no avail. We had to use the YouTube live stream audio, which isn't the best but hopefully still good enough. Thanks!

In this episode, Johnny, James, and Zack who inspires us as makers and content creators. 

In this episode, Johnny, James, and Zack how making things have changed their lives.